NETWORK
Category
TECHNICAL INFORMATION
DOWNLOAD
Cable description PANZERFLEX L- VS
Extra heavy duty power and control cable For application with high mechanical stresses (i.e.: tensile and torsion simoultaneously applied). These cables have a tensile load of minimum 2000 N (standard for control cables) and are indicated to be used on equipment such as container crane spreader reels, rack and pinion elevators usig guided cables, pendant station, all tenders etc..
TECHNICAL SPECIFICS
tinned copper conductor, extraflexible cl 6 IEC 60228 up to 6 mm², flexible cl. 5 IEC 60228 from mm². Both the class of conductors are specifically designed for mobile application
2Insulation:EPR compound better than 3GI3. Special compound with impreoved electrical and mechanical characteristics
3Cores Identification:Colours according to according to DIN VDE 0293 part 308 / HD 308 S2 Standard colours: - 4 cores: green/yellow, brown, black, grey - 5 cores: green/yellow, blue, brown, black, grey - ≥ 6 cores: black with printed numbers, green/yellow in the outer layer
4Central strainer (if any):Made of aramidic yarns To be used as support element
5Laying-up:Short lay length for better flexibilty ≤ 6,5 times the laying-up cores diameter in maximum 3 layer (for control cables)
6Separation (if any):tape(s)
7Inner sheath:Polychloroprene rubber based compound better than 5GM2
8Antitwisting Protection:Textile braid of synthetic yarns Firmly vulcanized bonded between inner and outer sheath
9Outer sheath: :yellow polychloroprene rubber compound Oil and chemical resistant, 5GM3/5GM5 abrasion and notch resistant
10Marking:U.T.V. CAVI manufactured BY PALAZZO- PANZERFLEX-L VS 0.6/1kV n. core x cross section
Other cables for this Type of use: